|
|
So, I did pull the trigger
Last Post 01/21/2014 05:50 PM by Cosmic Kid. 26 Replies.
|
Sort:
|
|
 Prev Next |
You are not authorized to post a reply. |
|
Orange Crush
Posts:4499
 |
| 12/03/2013 03:40 PM |
|
Posted By Hoshie S on 12/03/2013 12:21 AM
Ardennes are awesome. I am really happy with mine or get custom builds with the hed belgiums.
I'm about to pull the trigger on Ardennes for summer 2014 but it involves riding there, and around corner from Chimay brewery. I'm sure I'll come across some Belgian HEADS  |
|
|
|
|
Cosmic Kid
Posts:4209
|
| 12/04/2013 03:19 PM |
|
thinline, HED Ardennes FR wheelsets up on Competitive Cyclists 12 Days Of Xmas sale today, 50%.
$650 for the wheelset. |
|
| Just say "NO!" to WCP!!!!
|
|
|
thinline
Posts:325
|
| 12/05/2013 02:02 PM |
|
Wow, I'll check it out though it looks like I may have missed it.
On the upside, I checked my frame status today and it changed from "confirmation received" to "your frame is in machining." Apparently, the tubes are all cut and butted, then meticulously cleaned, after which they will only be handled by technicians with clean cotton gloves (gotta love this company). After machining it gets checked for alignment, then off to welding. Yay.
Thanks for the tip CK! |
|
|
|
|
Cosmic Kid
Posts:4209
|
| 12/05/2013 02:55 PM |
|
Still listed....I think they are keeping everything up until the Saale is over or the qty's are gone.
http://www.competitivecyclist.com/competitivecyclist/12-Days-of-Christmas/cat100204166/promo.html?INT_ID=IB13797 |
|
| Just say "NO!" to WCP!!!!
|
|
|
Gonzo Cyclist
Posts:568
|
| 12/08/2013 06:16 PM |
|
Nice, 650.00 for a set of Ardennes? very nice!! That bike is going to be sweet thinline
whoa bobswire, love those Merckx's!! |
|
|
|
|
thinline
Posts:325
|
| 12/09/2013 09:03 AM |
|
This morning's update :-)
Welding
Your frame is currently in the welding process, the most time-consuming part of the frame building process.
Seven's welders are among the most skilled artisans in the industry. Indeed, their work has been referred to as "kinetic sculpture" for its meticulous, elegant look.
Oxygen, dirt, and grease are the prime enemies of welding. When any of these contaminants react with the weld, the metal can become brittle, weakening the weld dramatically. To prepare your frame for welding, we first remove, or purge, all of the airborne oxygen, nitrogen, and other gases from the weld area by forcing a positive flow of argon through the tubes. Then, we use a specially-modified TIG (tungsten inert gas) welding torch that immerses the welding area in argon gas. This combination of external and internal mechanisms allows us to bathe the frame in an inert gas--argon--and therefore maintain an oxygen-free environment during welding. To further prevent weld contamination, welders continue to wear cotton gloves throughout the process.
Maintaining an even flow of argon throughout the frame, we weld all of your frame's joints. To maintain proper alignment, the frame's joints are welded in a precise, staggered pattern. For example, we weld a portion of the right side of the head tube/top tube joint first, then follow it immediately by the left side, and continue to alternate section by section, until the entire frame is complete. This decreases the amount of post-weld alignment, or cold-setting, that the frame requires.
Because a straight frame is so important, we check your frame's alignment a minimum of three times during welding to ensure that it falls within our specifications. Should a frame show any signs of misalignment during the welding process, we alter the weld sequence process or cold-set the weld to pull the frame back into perfect alignment.
Once your frame has been welded and its alignment checked, it's ready to have brake bosses, cable guides, rack mounts and other parts welded on. These parts are tacked and welded to the frame using a method similar to that used to tack the frame. Specially-made fixtures hold the parts in place to ensure proper placement and alignment. After another look at alignment, we weld the parts onto the frame.
Ready for its alignment to be scrutinized one last time in final machining, your frame is not far from completion.
|
|
|
|
|
bobswire
Posts:304
|
| 12/09/2013 09:11 AM |
|
| I really like how they keep you updated during the process. |
|
|
|
|
thinline
Posts:325
|
| 12/11/2013 08:43 AM |
|
| Latest update is the frame is "in finishing" with a scheduled ship date of Friday the 13th! I have picked out everything but wheels. |
|
|
|
|
Cosmic Kid
Posts:4209
|
| 12/11/2013 09:24 AM |
|
HED Ardennes still up on the 12 Days of Xmas sale over at CC....
Just sayin'..... |
|
| Just say "NO!" to WCP!!!!
|
|
|
thinline
Posts:325
|
| 12/12/2013 04:19 PM |
|
:-) This afternoon's update :-)
Your frame has left Seven's factory, and is on its way to your local shop where a skilled mechanic will build it up into your new bike. Best wishes for many happy miles aboard your new Seven. Please drop us a line and let us know what you think; we'd love to hear from you.
CK, unfortunately Comp Cyc does not appear to have the "stallion" build wheels on sale. The ones on sale have a max rider weight of 190 lbs. I'm 6'2 big guy and during the season float about between 185-190ish so I am going to pass. Being at the high end of the rider weight range and Vermont's very rough roads, I figure it's a wise decision. The stallion build is good up to 225 and is only about 2.5-3 ozs heavier so it would have been sweet to score those. Alas. |
|
|
|
|
thinline
Posts:325
|
| 01/21/2014 08:15 AM |
|
Yay, bike should be built up later this week. Will probably pick it up Saturday. Of course, the temperature this a.m. was -8 F. Not expected to be much better until a balmy Saturday when it should hit 20. Then back into the deep freeze next week. I figure now that I will have the new bike we'll at least get some snow.
Will post pics. |
|
|
|
|
Cosmic Kid
Posts:4209
|
| 01/21/2014 05:50 PM |
|
Damn you are a tease.
 |
|
| Just say "NO!" to WCP!!!!
|
|
|
| You are not authorized to post a reply. |
|
Active Forums 4.1
|
|
Latest Forum Posts
Zwift posted in Road Cycling
No articles match criteria.
|